3 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ dpp120-240 series features u low cost u 12v, 24v or 48v outputs u auto-ranging input (no manual switching) u parallel function switch u -40 (2) to +71c operation 120w & 240w din rail mount power supplies (1) recommend 1 clearance on all sides(2) dpp120 -35c model dpp120-xx-1 dpp240-xx-1 ac input voltage range vac 93 - 132 / 186 - 264vac, single phase. auto select input frequency hz 47 - 63hz dc input voltage range vdc 210 - 370vdc inrush current (115 / 230vac) a 24 / 48a 30 / 60a power factor - meets en61000-3-2 input current (115 / 230vac) a 2.8 / 1.4a 5.4 / 2.2a output voltage accuracy % -0, +1% of nominal line regulation % 0.5% load regulation % 1% (5% when set in parallel mode) ripple and noise (20mhz bw) mv 50mv 100mv overcurrent protection (typ) - 110 - 145% overvoltage protection v see model selector overtemperature protection - - hold up time (230vac input) ms > 30ms parallel operation - set in parallel (droop) mode - maximum of 3 units led indicators - green led = on, red led = dc output low dc good relay (24v model only) - 0.3a rated normally open relay contacts, closes when output is above 17.6 - 19.4v operating temperature - -40 (2) to +71c (derate linearly 2.5%/c from 61 to 71c) storage temperature c -40 to +85c operating humidity - 20 - 95% rh (non condensing) cooling (1) - convection withstand voltage - input to output 3kvac for 1 min. isolation resistance - >100m at 25c & 70%rh, output to ground 500vdc vibration (operating) - iec 60068-2-6 (mounting by rail: random wave, 10-500 hz, 2g, ea. along x, y, z axes 10 min/cycle, 60 min) shock (operating) - iec 60068-2-27 (half sine wave, 4g, 22ms, 3 axes, 6 faces, 3 times for each face) safety agency approvals - ul508 listed, ul60950-1, en60950-1, ce conducted & radiated emi - en55022 class b en55022 class a weight (typ) g 920 1000 size (wxhxd) (1) in 2.5 x 4.92 x 4.59 3.27 x 4.92 x 4.57 case material - metal warranty yrs two years speci? cations key market segments & applications
4 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision a7: nov 2011 dpp120-240 series adjust. output over- model voltage range curr. voltage eff. DPP120-12-1 12v 11.4 - 14.5v 10a 15 - 17.4v 84% dpp120-24-1 24v 22.5 - 28.5v 5a 30 - 34.8v 86% dpp120-48-1 48v 45 - 55v 2.5a 60 - 69.6v 87% dpp240-24-1 24v 22.5 - 28.5v 10a 30 - 34.8v 89% dpp240-48-1 48v 47 - 56v 5a 60 - 69.6v 90% model selector for additional information, please visit us.tdk-lambda.com/lp/products/dpp-series.htm outline drawing (dpp120) outline drawing (dpp240) suf? x description blank non detachable connectors b detachable input and output connectors snap-on mounting: snap onto din rail ts35/7.5 or ts35/15. (no tools required) options # function 1 dc good relay 2 dc good relay 3 +v 4 +v 5 -v 6 -v 7 chassis ground 8 l 9 n terminal assignments dpp 15w to 100w dpp480 480w single and three phase dsp 10w to 100w low pro? le dlp 75w to 240w single phase other din rail products
|